Kitchen Worktops in Hardwood, Granite, Corian®, Zodiaq®, Minerelle™, Maia, Artis, LG HI-MACS® Acrylic, Apollo Solid Surface, Apollo Quartz, Apollo Slab, Laminate, Silestone, Caesarstone and Luxore
All at unbeatable prices
*Phone lines are open Monday to Friday from 9am to 9pm*
*Saturday from 10am to 2pm*
Handling &Storage Guide
for Minerelle Kitchen Worktop
- Minerelle™ worktops should be carried individually and vertically to eliminate any possibility of damage.
- Always unpack your Minerelle™ worktops and check for signs of damage caused in transit, report any problems found before proceeding further with the installation. Do not rest components on abrasive or gritty surfaces that may cause scratching.
- Minerelle™ is less prone to colour matching problems than most other solid surface products. However, components that are to be used together on the same job should be checked for colour match under good lighting conditions, if the material appears defective contact your distributor immediately.
Note: To check good colour match between two components that came from different stock periods it is advisable to lightly sand both pieces to check that the texture is not causing a visual colour shade. - Store Minerelle™ worktops indoors in a well ventilated dry area. Components must be stored in racks, horizontally with adequate support along their full length.
- Before fabrication or installation, all Minerelle™ worktop products should be brought to room temperature of minimum 16 ° C (60 ° F).
Note : Please note that edging or cast sheet products will become more brittle in cold temperatures so handle with care. - Store adhesive destined for immediate use to room temperature
